PDF versionSaint-Petersburg State Polytechnic University
Chair "Printing machines"
The Chair was established in 2005 in the structure of Mechanical Machine-Building Faculty of Saint-Petersburg State Polytechnic University.
The training is conducted in major "Printing machines and automated complexes" on budget and contractual bases, full-time and external training.
Term of full-time training – 5 years. Term of external training – according to individual contract.
Upon graduation from the University, the graduates are awarded qualification "specialist" (mechanical engineer of printing equipment), and they are issued state diplomas of higher education.
During the first years, the students receive basic general theoretic technical and humanitarian training in the scope, stipulated by the Ministry of Education for technicians with higher education.
Training in the senior years is conducted under professional program, as well as under target programs of training subject to requests of branch enterprises, thus providing the possibility of practical employment for future graduates of the Chair even prior to graduation from the University.
The Chair has its own laboratory base with printing machines of relief, offset, screen and digital printing. There is a complex of finishing equipment, a design-studio, a photographic laboratory, a sector of computer prototyping, a laboratory of manual sheet formation and a sector of machine preparation of paper.
Scientific-academic staff of the Chair is composed of professors and senior lecturers, which have been qualified in the field of polygraphy and concomitant disciplines, and also possess long-term teaching experience.
· Ivanov Alexander (e-mail: ivanov@mediabooks.ru)
Head of the Chair, Candidate (Ph.D.) of Technics, Head of the Department of Information Resources, President of Publishing-Printing Association of the Universities of Russia.
Scientific interests: information management technologies in publishing and printing; management and information support of printing production.
Given lecture courses:
- Domestic and foreign publishing (17 hours).
- Imitation models (17 hours).
- Standards in polygraphy (17 hours).
- Information technologies in publishing and printing (34 hours).
· Polyakov Alexander (e-mail: ap99@mail.ru)
Fellow of the Academy of Engineering Sciences, Doctor of Technics, Professor.
Scientific interests: computer architectures, data processing, intelligent systems, information problems of polygraphy, knowledge representation, etc.
Given lecture courses:
- Automated control systems (34 hours).
- Architecture of modern computers (17 hours).
- Basics of media technologies (34 hours).
- Automation of engineering processes in polygraphy (34 hours).
- CAD systems in printing machine-building (34 hours).
- Intelligent technologies and knowledge representation (34 hours).
- Mathematical principles of system theory. Technology of intelligent systems (34 hours).
- Intelligent systems of research-and-production activity control (34 hours).
- Scientific text terms (17 hours).
- Information technologies in publishing (17 hours).
- Information medicine (34 hours).
· Vaganov Vyacheslav (e-mail:format@sp.ru)
"Format" Chief Engineer, senior researcher, Candidate (Ph.D.) of Technics.
Scientific interests: production hybrid printing systems of package manufacture, optimization of foodstuffs packaging technology.
Given lecture courses:
- Imitation models (17 hours).
- Standards in polygraphy (17 hours).
- Physical-chemical basics of technology (17 hours).
- Printing equipment and technology (34 hours).
- Equipment and technology of prepress processes (17 hours).
- Technology of flexographic and screen printing (60 hours).
· Konovalov Leonid (e-mail:Leonid.Konovalov@xerox.com)
Chief Project Manager of "Xerox-CIS" Corporation, Candidate (Ph.D.) of Technics.
Scientific interests: physical chemistry, integration of digital printing systems with digital warehouses of document images, automation of activity of digital printing enterprises.
Given lecture courses:
- Network technologies and information flows (17 hours).
- Digital printing systems and equipment (34 hours).
- Equipment and technology of prepress processes (17 hours).
· Nikitina Tatiana (e-mail:nik_tatiana@mail.ru)
Candidate (Ph.D.) of Technics.
Scientific interests: engineering graphics, chromatics and coloristics, information and industrial design.
Given lecture courses:
- Basics of advertising (34 hours).
- Descriptive geometry (17 hours).
- Chromatics and coloristics (34 hours).
- Design of visual means of communication (17 hours).
Saint-Petersburg State Polytechnic University
Curriculum
of preparation of certified specialists in the course
651600 "Processing machines and equipment"
of major 170800 "Printing machines and automated complexes"
(full-time form of training for persons with secondary (complete) general education)
Term of training: 5 years
Qualification: engineer
|
№ |
Name of the disciplines
|
Number of training hours
|
||
|
Lectures
|
Practical training
|
Laboratory
|
||
|
1 year (fall term)
|
||||
|
1.
|
Foreign language (test)
|
-
|
34
|
-
|
|
2.
|
Physical education (test)
|
-
|
68
|
-
|
|
3.
|
Mathematics (examination, test)
|
51
|
51
|
-
|
|
4.
|
Information science (examination, test)
|
34
|
-
|
34
|
|
5.
|
Physics (examination, test)
|
34
|
34
|
17
|
|
6.
|
Chemistry (examination, test)
|
34
|
-
|
34
|
|
7.
|
Descriptive geometry (examination, term paper)
|
34
|
34
|
-
|
|
1 year (spring term)
|
||||
|
1.
|
Foreign language (test)
|
-
|
34
|
-
|
|
2.
|
Physical education (test)
|
-
|
68
|
-
|
|
3.
|
Native history (test)
|
34
|
34
|
-
|
|
4.
|
Mathematics (examination, test)
|
51
|
51
|
-
|
|
5.
|
Information science (examination, test)
|
34
|
-
|
51
|
|
6.
|
Physics (examination, test)
|
34
|
17
|
17
|
|
7.
|
Engineering graphics (test)
|
-
|
34
|
-
|
|
8.
|
Theoretical mechanics (examination, test)
|
34
|
34
|
-
|
|
№ |
Name of the disciplines
|
Number of training hours
|
||
|
Lectures
|
Practical training
|
Laboratory
|
||
|
2 year (fall term)
|
||||
|
1.
|
Foreign language (test)
|
-
|
34
|
-
|
|
2.
|
Physical education (test)
|
-
|
68
|
-
|
|
3.
|
Philosophy (examination)
|
34
|
34
|
-
|
|
4.
|
Mathematics (examination, test)
|
34
|
34
|
-
|
|
5.
|
Calculus mathematics (test)
|
17
|
-
|
17
|
|
6.
|
Physics (examination)
|
34
|
34
|
17
|
|
7.
|
Engineering graphics (test, term paper)
|
-
|
34
|
-
|
|
8.
|
Theoretical mechanics (examination, test)
|
34
|
51
|
-
|
|
9.
|
Strength of materials (examination, term paper)
|
34
|
34
|
17
|
|
2 year (spring term)
|
||||
|
1.
|
Foreign language (examination)
|
-
|
34
|
-
|
|
2.
|
Physical education (test)
|
-
|
68
|
-
|
|
3.
|
Domestic and foreign publishing (test)
|
17
|
17
|
-
|
|
4.
|
Mathematics (test)
|
34
|
17
|
-
|
|
5.
|
Calculus mathematics (examination)
|
34
|
17
|
17
|
|
6.
|
Physical-chemical basics of technology (examination)
|
17
|
-
|
17
|
|
7.
|
Engineering graphics (term project)
|
-
|
34
|
-
|
|
8.
|
Strength of materials (examination, term paper)
|
34
|
34
|
-
|
|
9.
|
Theory of mechanisms and machines (examination, term paper)
|
51
|
34
|
17
|
|
10.
|
Science of materials (examination, test)
|
34
|
-
|
34
|
|
11.
|
Training practice
|
|
|
|
|
№ |
Name of the disciplines
|
Number of training hours
|
||
|
Lectures
|
Practical training
|
Laboratory
|
||
|
5 year (fall term)
|
||||
|
1.
|
Production organization and management (examination, test)
|
34
|
-
|
17
|
|
2.
|
Simulation models (examination, test)
|
34
|
17
|
17
|
|
3.
|
Automated control systems (examination, test)
|
34
|
17
|
-
|
|
4.
|
Network technologies and data flows (test, term paper)
|
17
|
17
|
-
|
|
5.
|
Automation of engineering processes in printing industry (examination, term project)
|
34
|
34
|
-
|
|
6.
|
Standards in polygraphy (term project)
|
17
|
34
|
-
|
|
7.
|
Digital printing systems and equipment (examination, test)
|
34
|
34
|
-
|
|
5 year (spring term)
|
||||
|
1.
|
Undergraduate practical training and diploma design
|
|
|
|
|
2.
|
Interdisciplinary examination
|
|
|
|
|
3.
|
Defense of graduation qualification thesis
|
|||
